Side-by-side · Manufacturer-published fields only

Glock G24 vs Glock G35 Gen 4

Both are .40 S&W long-slide records in this directory. The G24 is 21 mm / 0.83 in longer overall; its barrel is 18 mm / 0.71 in longer; both list 15-round standard magazines; the G24 is 55 g / 1.94 oz heavier under matched conditions.

Computed differences
FieldDifference
Overall length21 mm / 0.83 in (G24 is greater)
Overall widthIdentical figures
Overall heightIdentical figures
Barrel length18 mm / 0.71 in (G24 is greater)
Weight55 g / 1.94 oz (G24 is greater)
Standard capacityIdentical figures
How these differences are computed: each is the arithmetic difference between the two published figures, and it is only shown where both sources measured the field the same way. Where a source states a measurement basis the other does not match, the row says so instead of subtracting — figures on different bases are not comparable even when the numbers sit side by side. Differences marked involve at least one figure this directory converted between unit systems, so the difference is no more precise than that conversion.
Published fields, side by side
FieldG24G35
ManufacturerGlockGlock
Manufacturer size labelLong SlideCompetition
Directory frame classlong-slidelong-slide
Chambering.40 S&W.40 S&W
GenerationNot publishedGen 4
Overall dimensions243 × 33 × 139 mm / 9.57 × 1.3 × 5.47 in (height: including magazine)222 × 33 × 139 mm / 8.74 × 1.3 × 5.47 in (height: including magazine)
Barrel length153 mm / 6.02 in135 mm / 5.31 in
Weight760 g / 26.81 oz (without magazine)705 g / 24.87 oz (without magazine)
Standard capacity15 rounds15 rounds
Trigger pull28 N / ≈6.29 lb24 N / ≈5.4 lb
VerificationSource verified 2026-08-12Source verified 2026-08-12
Full records, with every value beside the source it came from: Glock G24 · Glock G35 Gen 4. More from these makers: Glock.
Reference information only. Not legal, purchasing, training, carry, storage, or assembly advice. Manufacturer technical data are rounded and may change without notice. Spotted an error? Submit a source-backed correction.