Side-by-side · Manufacturer-published fields only

CZ P-10 C vs Glock G19 Gen 6

Both are 9x19mm Parabellum compact records in this directory. The P-10 C is 2 mm / 0.12 in longer overall; both list the same barrel length; both list 15-round standard magazines; the P-10 C is 100 g / 3.52 oz heavier under matched conditions. One field is not comparable — overall height — because the makers publish them on different measurement bases.

Computed differences06
FieldDifference
Overall length2 mm / 0.12 in (P-10 C is greater)
Overall width2.4 mm / 0.05 in (G19 is greater)
Overall heightNot comparable — P-10 C: magazine state not stated by CZ; G19: including magazine
Barrel lengthIdentical figures
Weight100 g / 3.52 oz (P-10 C is greater)
Standard capacityIdentical figures
How these differences are computed: each is the arithmetic difference between the two published figures, and it is only shown where both sources measured the field the same way. Where a source states a measurement basis the other does not match, the row says so instead of subtracting — figures on different bases are not comparable even when the numbers sit side by side. Differences marked ≈ involve at least one figure this directory converted between unit systems, so the difference is no more precise than that conversion.
Published fields, side by side
FieldP-10 CG19
ManufacturerCZGlock
Manufacturer size labelNot publishedCompact
Directory frame classCompactCompact
Chambering9x19mm Parabellum9x19mm Parabellum
GenerationNot publishedGen 6
Overall dimensions187 × 32 × 132 mm / 7.4 × 1.3 × 5.2 in (height: magazine state not stated by CZ)185 × 34.4 × 128 mm / 7.28 × 1.35 × 5.04 in (height: including magazine)
Barrel length102 mm / 4 in102 mm / 4.02 in
Weight740 g / 26.1 oz (with empty magazine)570 g / 20.11 oz (without magazine)
Standard capacity15 rounds15 rounds
Trigger pull25 N / 5.6 lb26 N / ≈5.85 lb
VerificationSource verified 2026-08-12Source verified 2026-08-11
Reference information only. Not legal, purchasing, training, carry, storage, or assembly advice. Manufacturer technical data are rounded and may change without notice. Spotted an error? Submit a correction.